Connecting R113 Rotary Disc Header Hydraulic And Electrical Systems - M2170 Windrower - MacDon M2170 Operator's Manual

22. Proceed as follows:
• If attaching the header to an M2170 Windrower:
Systems – M2170 Windrower, page 265
• If attaching the header to an M2260 Windrower:
Systems – M2260 Windrower, page 268
Connecting R113 Rotary Disc Header Hydraulic and Electrical Systems – M2170 Windrower
The header's hydraulic and electrical multicoupler will need to be connected to the windrower.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
2. Retrieve the hydraulic hoses from the header.
3. Push latch (A) to unlock platform (B).
262170
OPERATION
Connecting R113 Rotary Disc Header Hydraulic and Electrical
Connecting R113 Rotary Disc Header Hydraulic and Electrical
B
Figure 4.303: Left Platform
265
A
1015478
Revision A