2. Manually rotate light brackets (A) forward as shown.
3. Start the engine.
4. FULLY extend (A) or retract (C) the anti-shatter shield as
follows:
• Fully extend (A) the shield by pressing and holding
F6 (D) on the operator console.
• Fully retract (C) the shield by pressing and holding
F5 (B) on the operator console.
IMPORTANT:
Do NOT operate the header in the field with the shield
partially extended.
262170
OPERATION
A
Figure 4.482: Grass Seed Version – Field Position
A
Figure 4.483: Grass Seed Version – Field Position
347
C
B D
Revision A