Clearing Fault Codes - MacDon M2170 Operator's Manual

If multiple faults are detected, the number of faults will appear
in the corner of telltale icon (A).
Selecting the question mark symbol next to the short
description (Refer to Figure
description of the fault. If there are multiple faults, telltale
icons (A) will appear on screen in a row.

3.17.17 Clearing Fault Codes

The lists of inactive fault codes stored on the HarvestTouch
1. Turn the ignition key to the ACC or RUN position. Make sure the engine is not running.
NOTE:
You cannot clear fault codes if the engine is running, or if there are any active fault codes.
262170
OPERATOR'S STATION
3.129, page 108) displays a detailed
Figure 3.130: Telltale Icon – Multiple Faults Detected
A
Figure 3.131: Fault Description Page
™
Display can be cleared using the operator's console.
109
A
1016235
1016236
Revision A