Table of Contents
Advertisement
4. Replace bulb (A) (MD #208191).
IMPORTANT:
Do NOT touch the glass with your fingers.
5. Insert single retaining tab (A) into the dome light bezel.
6. Insert a slotted screwdriver (or similar prying tool) into
slot (B), and gently pry the lens cover until retaining
tabs (C) engage into the dome light bezel.
Replacing Cabin Dome Light Assembly
The cabin dome light improves visibility inside the cab. If the dome light is burnt out or damaged, it will need to be
replaced.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Shut down the engine, and remove the key from the ignition.
262171
MAINTENANCE AND SERVICING
Figure 6.202: Cabin Dome Light with Cover Removed
Figure 6.203: Cabin Dome Light
408
A
A
C
1015623
B
Revision A
Advertisement
Table of Contents
Troubleshooting
