Filling Hydraulic Oil Tank - MacDon M2170 Operator's Manual

12. Reinstall plug (A) on the hydraulic oil tank.
13. Close the hood. For instructions, refer to
Hood, page 363.
14. Dispose of used oil in a manner that complies with local
rules and regulations.

5.13.3 Filling Hydraulic Oil Tank

A properly filled hydraulic oil tank reduces the risk of corrosion and clogged filters.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Park the windrower on a level surface.
2. Shut down the engine, and remove the key from the ignition.
3. Open the hood. For instructions, refer to
4. Turn plug handle (A) counterclockwise until loose and then
remove the plug by pulling it straight out.
NOTE:
When filling oil at a fast rate, the screen element in the fill
tube restricts the oil and makes it difficult for air to escape.
262170
MAINTENANCE AND SERVICING
5.3.2 Closing
Figure 5.154: Reservoir Plug
5.3.1 Opening Hood, page
Figure 5.155: Plug Handle
451
A
362.
A
Revision A