Table of Contents
Advertisement
13. Pull platform (A) toward the cab until it stops and the latch
is engaged.
Rotary Disc-Only Configuration – Quick Coupler Connections
The rotary disc-only configuration allows the windrower to operate with compatible rotary disc headers. Attaching the
header's hydraulic connections to the windrower's ports using quick couplers does not require any additional tools or
hardware.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
2. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
262170
OPERATION
Figure 4.256: Left Platform
Figure 4.257: Left Platform
243
A
A
B
1015479
Revision A
Advertisement
Table of Contents
Troubleshooting
