Table of Contents
Advertisement
Setting Float Options with Fixed Deck
When using an auger or rotary header, the DECK SHIFT buttons can be used to store three float settings. This is useful
when ground conditions vary, or when having one side lighter is desirable (such as cutting along wheel tracks or irrigation
borders).
DANGER
Ensure that all bystanders have cleared the area.
1. Start the engine and use HEADER TILT switches (A) and (B)
on the ground speed lever (GSL) to set header tilt to the
mid-range position.
2. Engage the header by pushing and holding down HEADER
ENGAGE switch (A), and pulling up on collar (B).
262170
OPERATION
B
Figure 4.384: GSL
Figure 4.385: Header Engage Switch
300
A
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
