MacDon M2170 Operator's Manual page 113

Header information:
The information displayed depends on the type of header
attached to the windrower and which run screen is active.
• Run screen #1: Displays reel, draper, knife, or disc speed and
pressure; alarm point, and indexing (factory-set according to
header)
• Run screen #2: Displays draper, knife, or disc speed and
pressure; reel height and fore-aft position; hydraulic
pressure; and load bar
• Run screen #3: Displays performance data including fuel per
hour/acre, acres per hour, and sub acres per hour
(resettable)
• Run screen #4: Displays cooling fan speed, engine air intake
temperature, hydraulic oil temperature, and engine coolant
temperature
Header position area:
• Displays basic header functions: height (A) and angle (C)
• Access to float settings (B)
• Access to the menu (D)
• Dots (E) indicate that there are multiple pages of header or
windrower information as illustrated in Figure
Telltales:
• Telltales (A) indicate an engine or windrower fault
• Telltales are amber or red in color accompanied by a symbol
for the fault
• Telltales display a short description (B) of the fault
262170
OPERATOR'S STATION
Figure 3.76: Draper Header Information
A
3.73, page 87
Figure 3.77: Current Header Position
Figure 3.78: Faults/Telltales
89
C
B
E
A
B
D
1016051
Revision A