20. Slide support (A) into center-link support (B) and secure it
with hardware (C).
21. Place hoses (A) and electrical harness (B) disconnected from
the windrower into storage plate (C).
NOTE:
Install caps and plugs on open lines to prevent the buildup
of dirt and debris while the header is in storage.
NOTE:
Some parts have been removed from the illustration for the
sake of clarity.
22. Back the windrower away from the header.
23. Shut down the engine, and remove the key from
the ignition.
262170
OPERATION
Figure 4.349: Hose Storage Position
A
Figure 4.350: Hydraulic Storage Plate
284
B
C
A
C
A
B
B
A
C
Revision A