MacDon M2170 Operator's Manual page 306

14. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
15. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
16. Disconnect electrical harness (D), and hydraulic hoses (A),
(B), and (C) from the windrower.
262170
OPERATION
Figure 4.343: Left Platform
D
Figure 4.344: Header Drive Hydraulics – M2260
Connection Locations, Low Pressure Case Drain Kit
B6698 Installed
D
Figure 4.345: Header Drive Hydraulics – M2170
Connection Locations
282
A
C
A
B
A
C
B
B
1015479
Revision A