Table of Contents
Advertisement
7. Position bracket (A) and install back bolts (C).
8. Install bottom bolts (B).
9. Tighten the bolts as follows:
a.
Snug bottom bolts (B), then snug back bolts (C).
b. Tighten and torque back bolts (C) to 746–770 Nm
(550–570 lbf·ft).
c.
Tighten and torque bottom bolts (B) to 746–770 Nm
(550–570 lbf·ft).
10. Repeat Step
7, page 511
opposite side.
11. Lower the windrower to the ground.
IMPORTANT:
Torque the bolts after first 5 and 10 hours of operation.
Installing Forked Caster Wheel
The caster wheel will need to be attached to the axle assembly before it can be installed on the windrower.
1. Position axle assembly (B) into wheel (C) and secure it with
wheel nuts (A).
262170
MAINTENANCE AND SERVICING
to Step
9, page 511
on the
C
Figure 5.261: Caster Wheel Extensions
C
Figure 5.262: Caster Wheel Assembly
511
A
B
B
A
Revision A
Advertisement
Table of Contents
Troubleshooting
