5.4 Electrical
Use electrical tape and wire clips as required to prevent wires from dragging or rubbing.
Keep lights clean and replace defective bulbs.
5.4.1 Replacing Light Bulbs
To replace a light bulb, follow these steps:
1. Using a Phillips screwdriver, remove screws (A) from
fixture and remove plastic lens.
2. Replace bulb and reinstall plastic lens and screws.
NOTE:
Use bulb trade #1156 for amber clearance lights and
#1157 for red tail light (Slow Speed Transport option).
147725
MAINTENANCE AND SERVICING
Figure 5.15: Clearance Light
126
Revision A