Table of Contents
Advertisement
8. Push latch (A) to unlock platform (B).
9. Pull platform (A) toward the cab until it stops and the latch
is engaged.
10. Calibrate the header on the windrower. For instructions,
refer to
4.4.6 Calibrating Header on HarvestTouch
page
285.
Rotary Disc-Only Configuration – Hard-Plumbed Fittings
The rotary disc-only configuration allows the windrower to operate with compatible rotary disc headers.
DANGER
To prevent bodily injury or death from the unexpected start-up of the machine, always stop the engine and remove the
key from the ignition before making adjustments to the machine.
CAUTION
Do NOT stand on an unlocked platform. It is unstable and may cause you to fall.
IMPORTANT:
To prevent contamination of the hydraulic system, use a clean rag to remove dirt and moisture from all (fixed and
movable) hydraulic couplers.
1. Shut down the engine, and remove the key from the ignition.
262170
OPERATION
B
Figure 4.318: Left Platform
™
Display,
Figure 4.319: Left Platform
272
A
1015478
A
Revision A
Advertisement
Table of Contents
Troubleshooting
