MacDon M2170 Operator's Manual page 474

6. From beneath the windrower, locate hose (A) that connects
to inlet manifold (B).
7. Remove hose (A) from the elbow fitting, and allow the hose
to drain into a clean container.
8. Once the tank is empty, reattach the hose to the elbow
fitting.
9. Locate and remove magnetic drain plug (A) that is
underneath the hydraulic oil tank.
NOTE:
Pull the traction drive hoses out of the way to allow oil to
drop straight down into the catch pan.
10. Inspect and clean the magnetic drain plug for any debris.
11. Reinstall the drain plug. Torque the plug to 75–82 Nm
(55–60 lbf·ft).
262170
MAINTENANCE AND SERVICING
B
Figure 5.152: Inlet Manifold
Figure 5.153: Hydraulic Oil Drain
450
A
A
B
A
Revision A