Table of Contents
Advertisement
16. Pull platform (A) toward the cab until it stops and the latch
is engaged.
Connecting R2 Series Rotary Disc Header Hydraulic and Electrical Systems – M2260 Windrower
The header's hydraulic and electrical multicoupler will need to be connected to the windrower.
Proceed to the relevant procedure:
For auger/rotary disc/draper-ready configuration (A), refer to
Auger/Rotary Disc/Draper-Ready Configuration – Quick Coupler
Connections, page 235
for instructions.
262170
OPERATION
Figure 4.235: Left Platform
Figure 4.236: Header Hydraulics Configurations –
Auger/Rotary Disc/Draper-Ready
234
A
A A
1036608
Revision A
Advertisement
Table of Contents
Troubleshooting
