MacDon M2170 Operator's Manual page 297

2. Approach platform (A) on the left side of the windrower.
Ensure that the cab door is closed.
3. Push latch (B) and pull platform (A) toward the walking
beam until it stops and the latch engages.
4. Attach hose support (A) to the frame near the windrower
left cab-forward leg. Route the hoses under the frame.
NOTE:
Ensure that the hoses remain as straight as possible and
that they are not subject to damage from abrasion.
5. Remove the existing quick couplers and elbow fittings (if
they are installed) from header hydraulic pressure hose (A)
and return hose (B). Do NOT remove the fittings from case
drain hose (C).
262170
OPERATION
Figure 4.320: Left Platform
Figure 4.321: Hose Support Attachment
C
B
A
Figure 4.322: Rotary Disc Header Hose Bundle
273
A
A
B
1015479
Revision A