1. To access the Header Attachments page from the home
page or from a header run page, press MENU (A) to view
the menu options.
2. Press SETUP (B) followed by HEADER (C). The HEADER page
opens and lists all of the headers that have been attached
to the windrower.
NOTE:
The F4 shortcut button on the operator's console also will
display the HEADER SETUP page.
3. Select the header model. In this example, R216 DISC (A) is
selected and a list of setup options opens.
4. Select ATTACHMENTS (A).
262170
OPERATION
Figure 4.477: HarvestTouch
Figure 4.478: Header List
Figure 4.479: Header Setup
345
C
B
A
™
Display
A
A
Revision A