MacDon M2170 Operator's Manual page 452

4. Remove drain plug (A) and allow the lubricant to
finish draining.
5. Inspect the drain plug. Small metal shavings are normal. If
there are any larger metal pieces, Contact your MacDon
Dealer.
6. Reinstall drain plug (A), and remove check plug (B).
7. Add lubricant until the oil level reaches check plug (B). For
lubricant specifications, refer to
and System Capacities, page
8. Reinstall check plug (B).
9. Operate the engine at low idle, and check for leaks at the
check plug and drain plug.
262170
MAINTENANCE AND SERVICING
5.1.2 Lubricants, Fluids,
353.
Figure 5.115: M2170 - Engine Gearbox
Figure 5.116: M2260 - Engine Gearbox
428
B
A
B
A
Revision A