Replacing Red Taillights - MacDon M2170 Operator's Manual

3. Use the left or right platform to access marker lights (A)
and (B) attached to the mirror arms.
NOTE:
Hold onto the handholds on the cab front corners and
stand on the header anti-slip strips, or stand on the
maintenance platform when accessing the red and amber
lights.
4. Remove two screws (A) from the lens and remove the lens.
5. Push and twist the light bulb to remove it from the socket.
6. Install a new bulb in the socket, ensuring that the bulb base
is properly engaged in the socket.
• Use Bulb Trade #1157 for red taillights
• Use Bulb Trade #1156 for amber lights
7. Reinstall the lens with screws (A).

Replacing Red Taillights

If the red taillights burn out or are damaged, they need to be replaced.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Shut down the engine, and remove the key from the ignition.
262170
MAINTENANCE AND SERVICING
Figure 5.218: Cab-Forward Red and Amber Light
Locations
Figure 5.219: Red and Amber Lights
488
A
B A
B
Revision A