Fuel Specifications - MacDon M2170 Operator's Manual

Lubricant/Fluid Location
Diesel fuel Fuel tank
Hydraulic
Hydraulic oil
reservoir
Gearbox
Gearbox
lubricant
Gearbox Standard wheel
lubricant drive
Gearbox High-torque
lubricant wheel drive
Engine cooling
Engine coolant
system
Engine oil Engine oil pan
Air
Air conditioning
conditioning
system
refrigerant
Air Air conditioning
conditioning system total
refrigerant oil capacity
Windshield Windshield
washer fluid washer fluid tank

5.1.3 Fuel Specifications

Follow the specifications for fuel quality to optimize system performance and prevent damage to the engine or fuel
components.
Use only ultra low sulphur diesel (ULSD) from a reputable supplier. For most year-round service, No. 2 ULSD fuel meeting
ASTM specification D975 Grade S15 will provide good performance.
If the vehicle is exposed to extreme cold (below -7°C [20°F]) or is required to operate at colder-than-normal conditions for
prolonged periods, use climatized No. 2 diesel fuel, or dilute the No. 2 ULSD fuel with 50% No. 1 ULSD fuel. This will
provide better protection from fuel gelling or wax-plugging of the fuel filters.
19. Optional when operating temperature is below 0°C (32°F).
20. Denotes capacity of a dry system. Refill capacity is 58 liters (15 U.S. gallons).
262170
MAINTENANCE AND SERVICING
Description
Ultra low sulphur diesel (ULSD) Grade
No. 2, or ULSD Grade No. 1 and 2 mix
refer to 5.1.3 Fuel Specifications, page
354 for more information
Single grade transmission/hydraulic fluid
(THF)
Viscosity at 60.1 cSt @ 40°C
Viscosity at 9.5 cSt @ 100°C
SAE 75W-140 or 80W-140, API service
class GL-5 fully synthetic gear lubricant
(SAE J2360 preferred)
SAE 75W-140 or 80W-140, API service
class GL-5 fully synthetic gear lubricant
(SAE J2360 preferred)
SAE 85W-140, API service class GL-5
fully synthetic gear lubricant
ASTM D-6210 and CES-14603, Peak Final
™
Charge Global or Fleetguard ES
™
Compleat OAT. Refer to 5.1.4 Coolant
Specifications, page 355 for more
information
SAE 15W-40 compliant with SAE specs
for API Class SJ and CJ-4 engine oil
R134A
PAG SP-15
SAE J942 compliant
354
M2170 Capacity
518 liters
19
;
(137 U.S. gallons)
60 liters
(15.8 U.S. gallons)
2.1 liters
(2.2 U.S. quarts)
1.4 liters
(1.5 U.S. quarts)
—
30 liters
(7.92 U.S. gallons)
11 liters
(11.6 U.S. quarts)
2.38 kg
(5.25 lb.)
240 cc
(8.1 fl. oz.)
4 liters
(1 U.S. gallon)
M2260 Capacity
20
4.5 liters
(4.8 U.S. quarts)
33 liters
(8.7 U.S. gallons)
14 liters
(14.8 U.S. quarts)
Revision A