Replacing Bulbs In Standard Work Lights Or Cab-Forward Headlights - MacDon M2170 Operator's Manual

Hide thumbs Also See for M2170:

Table of Contents

MAINTENANCE AND SERVICING

Replacing Bulbs in Standard Work Lights or Cab-Forward Headlights

Lights are an important safety feature of the windrower. Replace damaged or malfunctioning bulbs or lamps immediately.

The following procedure applies to all halogen bulbs shown in Figure

483. If replacing the engine-forward

Replacing Headlight Bulb – Engine-Forward, page

headlight bulbs, refer to

Figure 5.209: Halogen Bulb Locations

A - Front Work Lights (Field)

B - Stubble Lights (Rear)

C - Rear Work Lights

D - Headlights (Cab-Forward)

To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the

key from the ignition before leaving the operator's seat for any reason.

Front work light is shown.

1. Shut down the engine, and remove the key from the ignition.