Anti-Shatter Shield And Hazard/Brake Lights Position - MacDon M2170 Operator's Manual

4.9.4 Anti-Shatter Shield and Hazard/Brake Lights Position

The anti-shatter shield helps feed delicate grass seed crops into the header.
Operate the anti-shatter shield as follows:
• To FULLY extend the shield, press F5 (A) on the operator
console until the baffle position is "10".
• To FULLY lower the shield, press F6 (B) on the operator
console until the baffle position is "0".
IMPORTANT:
Do NOT set the baffle position to 2–9 for any purpose.
To prepare for field mode, FULLY extend (A) the shield, and
manually rotate the light brackets (B) so they point to the front.
To prepare for transport mode, FULLY retract (A) the shield, and
manually rotate the light brackets (B) so they point outwards.
262170
OPERATION
Figure 4.489: Operator's Console
B
Figure 4.490: Anti-Shatter Shield and Lights – Field
Position
B
Figure 4.491: Anti-Shatter Shield and Lights –
Transport Position
350
A B
A
A
B
B
Revision A