Table of Contents
Advertisement
Figure 4.339: Float Removal
9. Remove the float as follows:
• If the HarvestTouch
• If the HarvestTouch
confirm the switch and float settings (D) are grayed out.
IMPORTANT:
Removing the float will release the tension in the float springs. This will prevent damage to the header lift linkages
when lowering the legs without a header or weight box attached to the windrower.
262170
A
Display shows the message "Resume Float?", then select NO (A).
™
™
Display does NOT show the message, then select FLOAT ADJUST (B), select switch (C), and
OPERATION
280
B
C C
D
Revision A
Advertisement
Table of Contents
Troubleshooting
