Table of Contents
Advertisement
10. Behind the cab and on the left side of windrower, locate
park brake coil P255 (A) on top of the hydraulic manifold
and disconnect the electrical connector from P255.
11. Remove bolt (A) securing covers (B) from the left and right
wheel legs.
12. Disconnect wheel motor power connector from coil (C) on
the left and right wheel motors:
• Connector P274 is on the left wheel motor
• Connector P264 is on the right wheel motor
262170
MAINTENANCE AND SERVICING
Figure 5.186: Hydraulic Manifold
Figure 5.187: Wheel Legs
470
C
A
B
A
Revision A
Advertisement
Table of Contents
Troubleshooting
