MacDon M2170 Operator's Manual page 334

3. The HEADER page lists all of the headers that have been
attached to the windrower. Select the header model. In this
example, D235 Double Knife (A) is selected.
4. Select RAISE LOWER RATES (A) from the list of options.
5. Header raise and lower rates are adjustable in two stages: a
half button press (on the ground speed lever GSL) adjusts
the slow rate (stage one); a full button press (on the GSL)
adjusts the fast rate (stage two).
On the HEADER RAISE/LOWER page, use the arrows next to
each GSL button action to control how quickly the header
responds:
• HEADER RAISE half button press (A): adjusts stage one
(slow rate)
• HEADER RAISE full button press (B): adjusts stage two
(fast rate)
• HEADER LOWER half button press (C): adjusts stage one
(slow rate)
• HEADER LOWER full button press (D): adjusts stage two
(fast rate)
• ONE-TOUCH-RETURN raise rate (E): adjusts how quickly
the header raises to a preset position
• ONE-TOUCH-RETURN lower rate (F): adjusts how quickly
the header lowers to a preset position
262170
OPERATION
Figure 4.403: Header List
Figure 4.404: Set-Up Header Menu List
Figure 4.405: Header Raise and Lower Rates
310
A
A
A
B
C D
F
E
Revision A