Table of Contents
Advertisement
Conveyor Speed Adjustment Buttons
The buttons to control header functions are located on the console.
Adjust the header or Double Windrow Attachment (DWA)
conveyor speed by pressing switch (A) to increase the speed, or
switch (B) to decrease the speed.
Conveyor speed can be adjusted in either manual or auto
modes. For instructions, refer to
page 320
for more information.
Auxiliary Lift Switches
The buttons to control header functions are located on the console.
With Double Windrow Attachment (DWA):
• Raise the DWA deck by pressing button (A), or lower the
deck by pressing button (B).
With swath compressor attachment:
• Raise the swath compressor by pressing button (A), or lower
it by pressing button (B).
262170
OPERATOR'S STATION
4.6.7 Adjusting Draper Speed,
Figure 3.70: Operator's Console Conveyor Controls
A
B
Figure 3.71: Operator's Console Auxiliary Controls
86
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
