4.4.5 R113 Rotary Disc Header
This section details the procedures necessary to physically attach an R113 Rotary Disc Header to a windrower and to
complete its hydraulic and electrical connections.
Attaching R113 Rotary Disc Header
The R113 SP is compatible with the M2170 and M2260 Windrowers, but not the M2170NT Windrower.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and
remove the key before leaving the operator's seat, and always engage the safety props before going under the
machine for any reason.
DANGER
Ensure that all bystanders have cleared the area.
1. Shut down the engine, and remove the key from the ignition.
2. Remove hairpin (A) from clevis pin (B), and remove the pin
from header support (C). Repeat this step on the other side
of the header.
3. Start the engine.
262170
OPERATION
Figure 4.290: Header Support
258
C
B
A
Revision A