Safety Signs; Installing Safety Decals - MacDon M2170 Operator's Manual

Hide thumbs Also See for M2170:

Table of Contents

1.11 Safety Signs

Safety signs are decals placed on the machine where there is a risk of personal injury, or where the Operator should take

extra precautions before operating the controls. They are usually yellow.

• Keep safety signs clean and legible at all times.

• Replace safety signs that are missing or illegible.

• If the original part on which a safety sign was installed is

replaced, ensure that the repair part displays the current

safety sign.

• Replacement safety signs are available from your Dealer.

Worn or damaged safety decals will need to be removed and replaced.

1. Decide exactly where you are going to place the decal.

2. Clean and dry the installation area.

3. Remove the smaller portion of the split backing paper.

4. Place the decal in position and slowly peel back the remaining paper, smoothing the decal as it is applied.

5. Prick small air pockets with a pin and smooth them out.

Figure 1.31: Operator's Manual Decal