Cab-Forward Lighting - Road - MacDon M2170 Operator's Manual

• Cab-forward road lights (A) with low/high beams
• Engine-forward road lights (B) with low/high beams
• Inner work lights (C)
• Outer work lights (D)
NOTE:
Work lights (D) are also turned on when the high beams are
activated in the cab-forward mode.
• Rear roof work lights (E)
• Rear swath lights (F)
NOTE:
For adjustment procedures, refer to
Cab-Forward, page 479.
3.7.2 Cab-Forward Lighting – Road
Road lights are used to light up the area ahead of the windrower.
The following lights are functional when ROAD LIGHT button (A)
is selected and the operator's station is locked in the cab-
forward mode:
• To toggle between the low and high beams, press HIGH
BEAM button (B)
• To operate the hazard lights, press HAZARD LIGHT
button (C)
262170
OPERATOR'S STATION
Aligning Headlights –
60
A
C
D
E
F
B
Figure 3.23: Windrower Lighting – Top View
C
B
Figure 3.24: Road Light Button
A
C
D
E
F
B
A
Revision A