Removing And Restoring Float - MacDon M2170 Operator's Manual

5. Press arrows (A) to adjust left or right float settings.
NOTE:
Float adjustments of 1.0 (out of 10) change the header
weight at the cutterbar by approximately 91 kg (200 lb.).
Adjust the float in increments of 0.05 to optimize field
performance.
6. Press switch (B) to remove or resume the header float.

Removing and Restoring Float

The header float can be removed and restored using the HarvestTouch
1. Press FLOAT SETTINGS icon (A) on the HarvestTouch
Display to show the float setting page.
2. Press float switch (A) on the FLOAT ADJUST page to remove
or restore the header float.
262170
OPERATION
A
Figure 4.381: HarvestTouch
™
Display.
™
Figure 4.382: HarvestTouch
Figure 4.383: HarvestTouch
299
B
™
Display
A
™
Display
A
™
Display
Revision A