Figure 4.407: Draper Header Run Screen 2
A - Reel Settings Icon
D - Draper Speed
4.6.2 Header Position
The header height, tilt angle, and float adjustments are used to optimize cutting characteristics for specific crops and
conditions.
For procedures on controlling header height, header tilt, and float, refer to
4.6.3 Adjusting Reel Fore-Aft Position
Header performance based on crop type and conditions can be optimized by adjusting the reel fore-aft position. The reel
fore-aft position is adjusted with the multi-function switches on the ground speed lever (GSL).
1. Press and hold the switch for the desired movement:
FORWARD (A) or AFT (B).
262170
OPERATION
A
B
E
B - Reel Speed
E - Reel Height
Figure 4.408: GSL
312
C
D
F
C - Draper Settings Icon
F - Reel Fore/Aft Position
4.5 Operating Header, page
A
295.
B
Revision A