MacDon M2170 Operator's Manual page 363

2. Engage the header by pushing and holding down HEADER
ENGAGE switch (A), and pulling up on collar (B).
3. Select one of the following deck positions using the DECK
SHIFT switches on the operator's console:
• Right-side delivery (A)
• Center delivery (B)
• Left-side delivery (C)
4. Disengage the header by pushing down on HEADER
ENGAGE switch (A).
5. Adjust the float setting for the selected deck position. For
instructions, refer to Setting Float, page
6. Repeat previous steps for the other deck positions.
262170
OPERATION
Figure 4.464: Header Engage Switch
Figure 4.465: Header Deck Shift Switches
297.
Figure 4.466: Header Engage Switch
339
B
A
A
B
C
A
Revision A