Every 1000 Hours; Removing And Installing Fuel Tank Vent Filter - MacDon M2170 Operator's Manual

Hide thumbs Also See for M2170:

Table of Contents

5.12 Every 1000 Hours

Complete the following maintenance tasks every 1000 hours of operation:

• Change the fuel tank vent filter. For instructions, refer to

• Clean the DEF supply module filter. For instructions, refer to

• Change the wheel drive lubricant. For instructions, refer to

The fuel tank is vented by a hose and filter in the platform rail. Change the filter every 1000 hours or annually, whichever

occurs first.

Change the filter as follows:

To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the

key from the ignition before leaving the operator's seat for any reason.

To avoid personal injury or death from explosion or fire, do NOT smoke or allow flame or sparks near the windrower

when servicing it.

1. Shut down the engine, and remove the key from the ignition.

2. Remove five bolts (A) and DEF tank cover (B) on the right

service platform.

MAINTENANCE AND SERVICING

5.12.1 Removing and Installing Fuel Tank Vent Filter, page

5.12.2 Diesel Exhaust Fluid Supply Module Filter, page

5.6.7 Changing Wheel Drive Lubricant – 10 Bolt, page

Figure 5.128: Right Service Platform