MacDon M2170 Operator's Manual page 221

26. Disconnect hose management system (A) from the
windrower by pulling latch lever (B) to open the latch. Keep
the latch open and move hose management system (A)
away from the header with handle (C).
27. Pivot hose management system (B) forward with
handle (A), and engage hook (D) into latch (C) on the
header.
28. Back the windrower away from the header.
29. Shut down the engine, and remove the key from
the ignition.
30. Reinstall clevis pin (B) into header boot (C) and secure it
with hair pin (A). Repeat at the opposite side.
262170
OPERATION
Figure 4.156: Hydraulic Hose Management System
C
Figure 4.157: Hydraulic Hose Management System
Figure 4.158: Header Stand
197
A
B
C
B
A
D
C
B
A
Revision A