Windrower Controls - MacDon M2170 Operator's Manual

3.15 Windrower Controls

The controls to operate the windrower are located on the console.
Console controls:
Turn signals (A) – Activates the turn signals on the windrower
and the header.
• Push-ON/Push-OFF (activating the hazard switch also
cancels the turn signal)
Ground speed lever (GSL) (B) – Controls speed and direction of
the movement.
• F: Forward
• N: NEUTRAL
• PARK: Engages neutral interlock, and applies park brake
when steering locked in center.
• R: Reverse
Hazard warning lights (C) – Activates the signals on the
windrower and the header.
• Push-ON / Push-OFF
Park (D) – Engages neutral interlock and applies park brake
when steering locked in center.
Horn (E) – Creates noise for signalling purposes.
Autosteer engagement button (F) – Engages/disengages the
automated steering system (if installed).
• ENGAGE: Click to engage
• DISENGAGE: Turn steering wheel to disengage
262170
OPERATOR'S STATION
B
D
Figure 3.54: Console Controls and Autosteer
76
F
A
C
A
E
Revision A