Table of Contents
Advertisement
Driving in Reverse in Cab-Forward Mode
In cab-forward mode, the operator's station is facing away from the engine. The instructions in this section show how to
operate the windrower in the reverse direction while in cab-forward mode.
WARNING
Back up slowly. Hold the steering wheel at the bottom and turn the wheel in the direction you want the rear of the
machine to travel.
1. Move throttle lever (A) to a mid-range position.
NOTE:
Reversing in low speed range and at reduced engine speed
is recommended since steering will be less sensitive than at
higher speed settings.
WARNING
Ensure that all bystanders have cleared the area.
2. Move ground speed lever (GSL) (B) rearward to the
desired speed.
3. Steer as shown.
262170
OPERATION
B
A
Figure 4.33: Console
Figure 4.34: Cab-Forward Mode
134
Revision A
Advertisement
Table of Contents
Troubleshooting
