Engine Controls - MacDon M2170 Operator's Manual

3.14 Engine Controls

The following information describes the engine controls that are located on the operator's console.
Ignition switch
• Accessory position (A): The windrower's electrical
accessories are turned ON without starting the engine
• Off position (B): All electrical systems are OFF
• Run position (C): Engine run position
• Start position (D): Turn fully clockwise to crank the engine,
and release to return the switch to RUN position
IMPORTANT:
Remove the ignition key when the windrower is not in use. The
ignition key also locks the doors and the tool box in the left
platform.
Throttle (A)
Controls the engine speed range
• MAX: Push the lever forward
• MIN: Pull the lever back
™
HarvestTouch Display (B)
• Fuel level monitoring
• DEF level monitoring
• High exhaust system temperature (HEST) indicator
• Exhaust system cleaning inhibit and forced indicator
• Speed monitoring (ground, engine, knife/disc, reel,
conveyor, and cooling fan)
• Pressure monitoring (knife, reel, conveyor, and supercharge)
• Engine parameters (coolant temperature, fuel consumption,
and engine load)
• Header position
For more information on the HarvestTouch
262170
OPERATOR'S STATION
Figure 3.51: Ignition Switch on Operator's Console
Figure 3.52: Engine Controls
™
Display, refer to 3.17 HarvestTouch
74
B
A
B
A
™
Display, page 87.
C
D
Revision A