7. Secure forming shield (C) to bolt and spacer (D) using clevis
pin (B) and lynch pin (A).
8. Repeat Step
5, page 219
opposite side of the forming shield.
9. Remove lynch pin (A) and washer (B) from straight pin (C).
262170
to Step
7, page 220
on the
OPERATION
Figure 4.208: Forming Shield Secured to Front of
Windrower Legs
Figure 4.209: Lynch Pin and Washer at Rear of
Windrower Leg
220
A
B
C
D
A
C
B
Revision A