Table of Contents
Advertisement
Stopping
This procedure describes how to bring a moving windrower to a complete stop and then shut off the engine.
WARNING
Do NOT move the ground speed lever (GSL) rapidly back to NEUTRAL. You may be thrown forward by a sudden stop
and the wheels may skid, reducing steering control. Always wear a seat belt when operating the windrower.
CAUTION
Park on a level surface with the ground speed lever (GSL) in the PARK position and the steering wheel in the locked
(centered) position. Wait for the HarvestTouch
brake is engaged.
1. Anticipate stopping and SLOWLY move GSL (A) to NEUTRAL
and into PARK.
2. Turn the steering wheel until it locks.
3. Move throttle lever (B) to low-idle position.
IMPORTANT:
Before stopping the engine, run at low idle for
approximately 5 minutes to cool off hot engine parts and
allow the turbocharger to slow down.
NOTE:
Avoid unnecessary idling. Stop the engine if it will be idling
for longer than 5 minutes.
NOTE:
The brakes engage automatically when the steering wheel
is locked in the PARK position.
4. Turn the ignition key counterclockwise to the OFF position.
262170
OPERATION
™
Display to beep and display a red P symbol to confirm that the parking
A
Figure 4.49: Console
144
B
Revision A
Advertisement
Table of Contents
Troubleshooting
