Table of Contents
Advertisement
3.7.5 Turn Signal / Hazard Lighting
Turn signal and hazard lights are used to alert other drivers.
Switches (A) activate the left and right turn signals. Press the
switches again to turn the selected signal off.
NOTE:
Turn signals can also be controlled with the REEL/DISC speed
switches on the ground speed lever (GSL) when the header is
disengaged.
Switch (B) activates the hazard lights. Press the switch again to
turn the lights off.
Amber turn signals / hazard lights (C) are visible from both front
and rear.
NOTE:
Amber turn/hazard repeater lights are located on the side of
each hazard placard.
262170
OPERATOR'S STATION
Figure 3.29: Beacon Light Button
A
Figure 3.30: Turn Signal / Hazard Button
C
Figure 3.31: Windrower Lighting – Top View
63
B
B
A
C
Revision A
Advertisement
Table of Contents
Troubleshooting
