Checking Engine Gearbox Lubricant Level And Adding Lubricant - M2170 Windrowers - MacDon M2170 Operator's Manual

Hide thumbs Also See for M2170:

Table of Contents

5.7.7 Checking Engine Gearbox Lubricant Level and Adding Lubricant – M2170

Ensure that the gearbox lubricant level is correct in order to maximize the service life of its components. Check the

lubricant level daily.

To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the

key from the ignition before leaving the operator's seat for any reason.

Park on a flat, level surface with the header on the ground, the ground speed lever (GSL) in the PARK position, and the

steering wheel in the locked position (centered). To confirm that the parking brake is engaged, wait for the

HarvestTouch

Display to beep and display a red P symbol

1. Park the windrower on a level surface.

2. Shut down the engine, and remove the key from the ignition.

If the engine is hot, wait 10 minutes before checking the gearbox lubricant level to allow the lubricant to cool and

settle in the gearbox's sump.

3. Open the hood. For instructions, refer to

4. Locate gearbox oil level check plug (A) under the

5. Remove oil level check plug (A). The lubricant should be

visible through the hole. Some lubricant may leak from the

level check port.

MAINTENANCE AND SERVICING

5.3.1 Opening Hood, page

Figure 5.67: Gearbox Lubricant Check Plug

Troubleshooting