Setting Guidelines; Engine Error Codes; Cab Display Module (Cdm) And Windrower Control Module (Wcm) Fault Codes - MacDon M205 2012 Operator's Manual

5.18.6 SETTING GUIDELINES

5.18.6.1 Pressure Settings
Header Model
R80/R85
D-SERIES
A-SERIES
5.18.6.2 R Series Rotary Header Disc Speeds
Crop
Heavy
Alfalfa
Light
Sudan, Sorghum,
Tall and
Haygrazer,
Stemmy
Timothy
Dense
Short Grass
Thin
* Suggested Overload Setting – 1,300 rpm.

5.18.7 ENGINE ERROR CODES

The Cab Display Module (CDM) displays "Error
Codes" when there is a fault with one of the
several sensors that monitor and control engine
operation, to assist the Operator or technician in
locating a specific problem with engine operation.
Refer to the Appendix for the Error Codes.
5.18.8 CAB DISPLAY MODULE (CDM) AND
WINDROWER CONTROL MODULE
(WCM) FAULT CODES
The CDM displays Fault Codes when there is a
fault with one of the several sensors that monitor
and control windrower operation, to assist the
Operator or technician in locating a specific
problem with the windrower. Refer to the Appendix
for the Fault Codes.
169469/169470/169471
OPERATOR'S STATION
Application/System
Disc Pressure
Reel/Draper Pressure
Knife/Conditioner Pressure
Condition Disc Rpm *
2,100–2,300
1,800–2,000
2,300–2,500
2,500
2,000–2,200
Suggested Overload
Warning Setting
psi (bar)
5,000 (344)
2,500 (172)
3,600 (248)
59
Revision E