Clearing Sub-Acres - MacDon M155 Unloading And Assembly Instructions

6. Press right arrow (C) to cycle between the setting options.
Press HAZARD (B) to confirm the desired setting.
7. Press SELECT (D).
• EXIT ENGINE ISC? will appear on the upper line.
• NO/YES will appear on the lower line.
8. Press right arrow (C) to select YES. Press SELECT (D).
9. Press PROGRAM (A) to exit programming mode.

7.3.17 Clearing Sub-Acres

The windrower has two counters for acres: one counter tracks the total number of acres harvested during the machine's
lifetime, while the other counter tracks the acres harvested during individual harvesting instances. The sub-acre counter
can be reset to zero as needed by accessing the SUB-ACRES menu in the windrower's cab display module (CDM).
1. With the key in the ON position and the operator's station
in cab-forward mode, press SELECT until SUB-ACRES
appears on the bottom line.
2. Press and hold PROGRAM button (A) until the counter is
reset to zero.
262320
CAB DISPLAY MODULE
MXXX
A
Figure 7.53: ISC RPM
A
Figure 7.54: Cab Display Module (CDM)
228
PRESS HAZARD TO SET
CXXX
ISC RPM ####
B
D
C
B
Revision A