Installing The Cable Grommet Assembly - ABB OmniCore V250XT Type B Product Manual

3 Installation and commissioning

3.7.7 Installing the cable grommet assembly

3.7.7 Installing the cable grommet assembly
Location
The illustration shows the location of the cable grommet assembly on the controller.
xx2200002163
Required spare parts
Spare part
Cable grommet asm
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Continues on next page
140
Note
The end user needs to install proper grommets according to the diameter of the
cables which need to go through the grommet.
Incorrect use of grommets will affect ingress protection, EMI/EMC and
temperature.
It is recommended to use icotek KT grommet.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V250XT Type B via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023-2023 ABB. All rights reserved.
Article number Note
3HAC066396-001
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Product manual - OmniCore V250XT Type B
426.
3HAC087112-001 Revision: A