Display Ospf Interface Hello - H3C S6550X-HI Series Command Reference Manual

Field
Cost
Disabled
Topology name

display ospf interface hello

Use
display ospf interface hello
OSPF interface.
Syntax
display ospf [ process-id ] interface [ interface-type interface-number ]
hello
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
argument, the command displays hello packet information for all OSPF processes.
interface-type interface-number
not specify this argument, the command displays information about hello packets sent by all OSPF
interfaces.
Usage guidelines
This command displays information about only multicast hello packets.
Examples
# Display information about hello packets sent by all OSPF interfaces.
<Sysname> display ospf interface hello
Area: 0.0.0.0
Interface: 172.16.0.1 (Vlan-interface10)
First 4 hello packets sent:
2019-02-05 11:05:10:121, succeeded
2019-02-05 11:05:20:121, succeeded
2019-02-05 11:05:30:121, succeeded
2019-02-05 11:05:40:121, succeeded
Description
Cost of the interface route in the topology.
Whether OSPF is disabled from advertising the topology for the interface:
Yes or No.
Topologies except the base topology are not supported in the current
software version.
base indicates the base topology.
: Specifies an OSPF process ID in the range of 1 to 65535. If you do not specify this
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
to display information about hello packets sent by an
: Specifies an interface by its type and number. If you do
44