Overcurrent Protector Information - LEGRAND Server Technology PRO4X User Manual

Option Description
A specific Displays the information for the specified inlet only.
inlet number
An inlet number needs to be specified only when there are more
than 1 inlet on your PDU.
Displayed information:
• • Without the parameter "details," only the inlet's name and RMS current are displayed.
• •
With the parameter "details," more inlet information is displayed in addition to the inlet name and
RMS current, such as the inlet's RMS voltage, active power and active energy.

Overcurrent Protector Information

This command is only available for models with overcurrent protectors for protecting outlets.
This command syntax shows the overcurrent protector information, such as a circuit breaker or a fuse.
# show ocp <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show ocp <n> details
Variables:
• •
<n> is one of the options: all, or a number.
Option
all
A specific
overcurrent
protector number
Displayed information:
• • Without the parameter "details," only the overcurrent protector status and name are displayed.
• •
With the parameter "details," more overcurrent protector information is displayed in addition to
status, such as the rating and RMS current value.
• • For Raritan's outlet-metered models that support "outlet peak current" sensors, information
indicating which outlet MAY cause the OCP-tripped event is available with this command. See
Possible OCP-Tripped Root Cause.
392
Description
Displays the information for all overcurrent protectors.
Tip: You can also type the command without adding
this option "all" to get the same data.
Displays the information for the specified overcurrent
protector only.