LEGRAND Server Technology PRO4X User Manual page 172

Field
Active powered
dry contact limit
1) Click Save.
▶
To configure default threshold settings:
Note that default threshold settings affect all sensors already being managed, and establish the initial
settings for any sensor added from now on. To customize the threshold settings on a per-sensor basis,
go to Individual Sensor/Actuator Pages
1) Click > Default Threshold Setup.
2) Click a sensor to open the threshold settings.
3) Make changes as needed.
• • To enable any threshold, select the corresponding checkbox.
• • Type a new value in the accompanying text box.
172
Function
Determines the maximum number of "active"
powered dry contact actuators that is
permitted concurrently.
• •
Range: 0 to 24
• •
Default: 1
(on page 179).
Note
• •
An "active" actuator is turned ON, or, for a
door handle, door is OPENED.
• • This setting only applies to "powered dry
contact" (PD) actuators rather than normal
"dry contact" actuators.
• •
You need either 'Change Peripheral Device
Configuration' privilege or 'Administrator
Privileges' to change the setting.