LEGRAND Server Technology PRO4X User Manual page 237

2) Enable or disable "SNMP v1 / v2c" and/or "SNMP v3" by clicking the corresponding checkbox.
• • The SNMP v1/v2c read-only access is enabled by default. The default 'Read community string' is
"public."
• • To enable read-write access, type the 'Write community string.' Usually the string is "private."
3) Enter the MIB-II system group information, if applicable.
• • sysContact - the contact person in charge of the system
• • sysName - the name assigned to the system
• • sysLocation - the location of the system
4) To configure SNMP notifications:
237