LEGRAND Server Technology PRO4X User Manual page 217

Field Description
CA certificate
This field appears when 'EAP' is selected.
CA certificate is required when "Enable verification of TLS
certificate chain" is selected by default; and strongly recommended
RADIUS
authentication
This field appears when 'EAP' is selected.
server name
Type the name of the RADIUS server if it is present in the TLS
certificate.
• •
The name must match the fully qualified domain name (FQDN)
of the host shown in the certificate
Do not leave this field blank as it reduces security.
Note: Auto-negotiation is disabled after setting both the speed and duplex settings to NON-Auto values,
which may result in a duplex mismatch.
• • Available settings for the CA Certificate:
If the required certificate file is a chain of certificates, and you are not sure about the requirements of a
certificate chain, see TLS Certificate Chain.
Field/setting Description
Enable Select this checkbox to verify the certificate of the EAP
verification of TLS authentication server. Then you must upload the certificate of the
certificate chain issuing CA in the next field.
Browse button Click this button to import the certificate of the issuing CA. Then
you can:
• •
Click Show to view the certificate's content.
• •
Click Remove to delete the installed certificate if it is
inappropriate.
• •
Select this checkbox to make the authentication succeed
Allow expired and
regardless of the certificate's validity period.
not yet valid
certificates
• •
After deselecting this checkbox, the authentication fails
whenever any certificate in the selected certificate chain is
outdated or not valid yet.
217