LEGRAND Server Technology PRO4X User Manual page 426

• •
<dest-1> is the IP address and prefix length of the subnet where the PRO4X belongs. The format is IP
address/prefix length.
• •
<hop> is the IP address of the next hop router.
• •
<ETH> is one of the interfaces: ETH1/ETH2, WIRELESS and BRIDGE. Type "bridge" only when your
PRO4X is in the bridging mode.
• •
<route_ID> is the ID number of the route setting which you want to delete or modify.
• •
<dest-2> is a modified route setting that will replace the original route setting. Its format is IP
address/prefix length. You can modify either the IP address or the prefix length or both.
Configuring DNS Parameters
Use the following commands to configure static DNS-related settings.
▶
Specify the primary DNS server:
config:# network dns firstServer <ip address>
▶
Specify the secondary DNS server:
config:# network dns secondServer <ip address>
▶
Specify the third DNS server:
config:# network dns thirdServer <ip address>
▶
Specify one or multiple optional DNS search suffixes:
config:# network dns searchSuffixes <suffix1>
-- OR --
config:# network dns searchSuffixes
<suffix1>,<suffix2>,<suffix3>,...,<suffix6>
▶
Determine which IP address is used when the DNS server returns both IPv4 and IPv6 addresses:
config:# network dns resolverPreference <resolver>
Variables:
426